Trailers apply a tremendous force on loading docks and over time can cause extensive damage to the building walls and foundation. Wrong-sized and poor quality bumpers do not provide the needed protection.
- Dock 1 0 4 – Customize Your Dock Bumpers For Sale
- Dock 1 0 4 – Customize Your Dock Bumpers Heavy Duty
- Dock 1 0 4 – Customize Your Dock Bumpers Around
- Dock 1 0 4 – Customize Your Dock Bumpers Without
Rite-Hite offers a wide selection of loading dock bumpers to meet your exact needs. Protect Your Facility with Loading Dock Bumpers by Contacting Us Today! DokSaver ® Loading Dock Bumper. Rite-Hite's revolutionary, patented DokSaver bumper design withstands the impact and abuse from trailer after trailer, year after year. It's the bumper that.
Protect your investment with Loading Dock Bumpers from Rite-Hite.
Your local Rite-Hite Representative can survey your loading dock conditions to determine the most effective bumper design and application for your operation.
To match your application needs, Poweramp® gives you a choice between two varieties of bumper blocks, laminated and molded. Dock Bumpers help protect against structural damage to buildings and docks caused by trucks. They will help cut maintenance costs and expensive repairs. Laminated Bumpers. Loading Dock Bumpers are a critical part of the investment in dock facilities. Since 1923 Durable Corporation has been recycling tires into quality products. As the leading manufacturer of laminated rubber dock bumpers, Durable has the finest protection available for docks, buildings, trucks, and cargo. Phone: 201-340-0908 Fax: 973-471-6707 Email: info@dockndoor.com Emergency 24hour service: 201-340-0908.
Important considerations will include:
- Dock approach – level, decline or incline
- Dock height
- Air-ride trailers
- Mounting face conditions
- Use of yard jockeys
- Types of trailers serviced
- Quantity and frequency of trailers
Rite-Hite offers a wide selection of loading dock bumpers to meet your exact needs.
DokSaver® Loading Dock Bumper
Rite-Hite's revolutionary, patented DokSaver bumper design withstands the impact and abuse from trailer after trailer, year after year. Chocolat 3 3 download free. It's the bumper that is so well built it comes with a 10 year warranty.
Application
- Use for maximum dock protection.
- Long-term solution for the most harsh loading dock conditions.
- 10-year limited warranty.
Features/Specifications
- Completely enclosed box construction uses 1/2' (12 mm) thick high-carbon steel.
- Unique design allows dock bumper to 'float' upon impact and eliminates steel rods.
- Load pressure is absorbed and distributed over entire back plate.
- Designed to withstand 75,000 lbs (168 kN) of pressure.
- Full width and height back plate is included with every DokSaver dock bumper.
Steel Faced Loading Dock Bumper
The Steel Faced Bumper is best used in dock areas where excessive friction occurs. It's so durable and long-lasting, it comes with a 5 year warranty.
Application
- Excellent dock protection.
- Very good solution for most loading docks.
- 5-year limited warranty.
Your local Rite-Hite Representative can survey your loading dock conditions to determine the most effective bumper design and application for your operation.
To match your application needs, Poweramp® gives you a choice between two varieties of bumper blocks, laminated and molded. Dock Bumpers help protect against structural damage to buildings and docks caused by trucks. They will help cut maintenance costs and expensive repairs. Laminated Bumpers. Loading Dock Bumpers are a critical part of the investment in dock facilities. Since 1923 Durable Corporation has been recycling tires into quality products. As the leading manufacturer of laminated rubber dock bumpers, Durable has the finest protection available for docks, buildings, trucks, and cargo. Phone: 201-340-0908 Fax: 973-471-6707 Email: info@dockndoor.com Emergency 24hour service: 201-340-0908.
Important considerations will include:
- Dock approach – level, decline or incline
- Dock height
- Air-ride trailers
- Mounting face conditions
- Use of yard jockeys
- Types of trailers serviced
- Quantity and frequency of trailers
Rite-Hite offers a wide selection of loading dock bumpers to meet your exact needs.
DokSaver® Loading Dock Bumper
Rite-Hite's revolutionary, patented DokSaver bumper design withstands the impact and abuse from trailer after trailer, year after year. Chocolat 3 3 download free. It's the bumper that is so well built it comes with a 10 year warranty.
Application
- Use for maximum dock protection.
- Long-term solution for the most harsh loading dock conditions.
- 10-year limited warranty.
Features/Specifications
- Completely enclosed box construction uses 1/2' (12 mm) thick high-carbon steel.
- Unique design allows dock bumper to 'float' upon impact and eliminates steel rods.
- Load pressure is absorbed and distributed over entire back plate.
- Designed to withstand 75,000 lbs (168 kN) of pressure.
- Full width and height back plate is included with every DokSaver dock bumper.
Steel Faced Loading Dock Bumper
The Steel Faced Bumper is best used in dock areas where excessive friction occurs. It's so durable and long-lasting, it comes with a 5 year warranty.
Application
- Excellent dock protection.
- Very good solution for most loading docks.
- 5-year limited warranty.
Features/Specifications
- Steel face is 3/8' (9.5 mm) thick high-carbon steel in front of laminated rubber bumpers.
- Face plate is welded to brackets with elongated holes.
- Steel face absorbs truck impact and slides over 3/4' (19 mm) steel support rods.
Laminated Loading Dock Bumper
This bumper is great for dock protection. A flat plate is used with dock levelers, but it also angles for almost any other application.
Application
- Good dock protection.
- Wide range of loading dock uses.
- 2-year limited warranty.
Features/Specifications
- Reinforced rubber slats are stacked between 3/8' (9.5 mm) steel angle or plate.
- 3/4' (19 mm) steel support rods are welded to angle or plate at both sides and go through rubber slats to tie bumper together.
Molded Loading Dock Bumper
This bumper is good for dock protection. Solid, one piece molded bumper with a smooth finish.
Application
- Made for light-duty applications.
- Many sizes and shapes for almost any application.
- 1-year limited warranty.
Features/Specifications
- Manufactured from reinforced rubber.
- Pre-drilled, countersunk mounting holes.
- Smooth rubber finish stands up to all weather conditions.
Extra Length Bumpers
Reinforced rubber pads, with 4' (100 mm) or 6' (150 mm) projection, come with a 2 year warranty. Available upon request.Extra Thick Bumpers
Use where dock seals are extra thick or where greater thickness is needed due to decline approach, overhangs or other architectural features. Made with reinforced rubber pads and comes with a 2 year warranty.Available in 9' (230 mm), 10' (255 mm) or 12' (305 mm) projections in the following sizes: 12' x 12' (305 mm x 305 mm) | 12' x 14' (305 mm x 355 mm) | 12' x 18' (305 mm x 460 mm) | 12' x 24' (305 mm x 610 mm) | 12' x 36' (305 mm x 915 mm) and 20' x 11' (510 mm x 280 mm) and 24' x 11' (610 mm x 280 mm)
Skip to main content
0
anonymous user
What should I consider when designing a dock system?
Dock sections can be easily attached to go straight out into the water, or create sun decks, 'L' shapes and boat slips.
- What Basic activities will the dock be used for -- parking boats, swimming, fishing, relaxing, etc. ?
- How many inches of water depth do you have, or will you need, at the end of your dock in order for it to function as you would like? If over 96' you may want to consider a FLOE floating dock system for added stability.
- How many feet from shore will it take to reach your desired depth? This will help determine the overall dock length required.
- How many boats will you park at your dock? How many visitor boats on average? This will help determine how many slips or lifts are needed.
- How many lifts will your design need to accommodate? This will help determine how many slips yo include in your design.
A floating dock is always self-leveling with the water level.
Do you have water depths that exceed 8 feet?Free-standing docks can get unstable in deeper water, while a floating system maintains its stability.
Do you have an unusually soft lake bottom or more than 1' of mud?Free-standing docks can need constant adjusting and leveling due to settling. If more than 1' of mud is present, you will face added challenges installing, leveling and removing a roll-in or stationary dock system. A floating dock system may be a better alternative.
Is your lake bottom hard sand or gravel without large boulders?A roll-in or stationary dock works best in applications where minimal settling occurs.
Do you have water depths of less than 8 feet?Every FLOE dock section has double braced anti-sway wheel kits that keep your dock more stable and can be used in deeper water than other roll-in docks, and they can be leveled with a cordless drill while standing on the dock.
Floating Docks:A hinge connector is used for each dock section connection point, except shore-end ramps. If you are combining two different widths, the size of hinge connector will correspond to the smaller width. Example: If you are connecting a 4' wide dock to a 6' wide dock, you will need a 4' hinge connector kit for that connection. Your FLOE dealer can assist you with this.
Roll-in & Stationary Docks:Quick Connects enable FLOE roll-in docks to be modular and configured any way you want them. They have two positions - one is for removal/installation and the other for when the dock is in posotion for use. The removal/installation position allows the sections to flex stress-free without binding while going over uneven terrain. The locking position is used once the dock is installed so the sections fit and lock tightly together.
A Shore end ramp will give you more dock length for your money. A Shore end ramp also gives you a smooth, no-step approach to your dock. Ramps are avalibale in 6' and 12' lengths. Ramp decking choices are aluminum or cedar.
Sundecks are a very important part of most docks. They give you a spacious area, typically at the end of a dock, so that you can better enjoy your lakeshore and related activities. Sundecks can be used at the end of a straight section, or along the side of a straight section.
They are available in many sizes including 4x8', 8x8', 8x12', and 8x16'. Or you can use two 4x16' sections placed side by side create an 8x16' sundeck. You could also use two 4x12' sections placed side by side to create an 8x12' sundeck. This offers an alternative to the installation of a larger one-piece 8x16' or 8x12'sundeck.
Wedges create the perfect corner and add beauty to your dock system. FLOE's quick attach system allows you to easily mount wedges in any corner of your dock system. Wedges are available in 2', 4' and 6' widths.
Vertical bumpers are recommended every 4 to 8 feet where boats will be parked, as well as on each side of exposed corners.
Support Posts or shore-end wheel kits are recommended if you are using a shoreend ramp or want to support the shore end of your first dock section.
Dock 1 0 4 – Customize Your Dock Bumpers For Sale
Other accessories available to compliment your dock system include dock steps, composite bench, bench arm rests, swim ladder, hammock stand, handrails and dock cleats. Please visit Dock Accessories on our website for more information.
Choose an option below
to start building your dock.
Roll-In
For medium to hard bottoms, mild to moderate slope and spacious shore area
Sectional
Works well in areas with minimal storage space and hilly terrain.
Dock 1 0 4 – Customize Your Dock Bumpers Heavy Duty
Floating
Dock 1 0 4 – Customize Your Dock Bumpers Around
Designed for lakes with frequent water depth fluctuation and soft or muddy lake bottoms.
Roll-In
For medium to hard bottoms, mild to moderate slope and spacious shore area
Sectional
Works well in areas with minimal storage space and hilly terrain.
Floating
Dock 1 0 4 – Customize Your Dock Bumpers Without
Designed for lakes with frequent water depth fluctuation and soft or muddy lake bottoms.
